Teledyne-lecroy PETracer ML Analyzer and Exerciser User Manual Manual de usuario Pagina 30
- Pagina / 274
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 2: Hardware Description PETracer ML User Manual
22 Teledyne LeCroy
Pin-Outs for the Data In/Out Connector
The following table lists the pin-out and signal descriptions for the Data In/Out connector
on a cable that connects to the Breakout Board.
Data In/Out Connector – Pin-Out
Note:
(*) Pins 4 and 17 have the same function: they allow external signals to be
used to cause triggering or recording. Pins 3 and 16 are used to transmit
output signals. Pins 6, 7, 8, 9, 18, 19, 21, and 22 (data pins) are used to
define data patterns for external input signals.
Note: All models of PETracer only support Data 0 - Data 3.
Prototype Rework Area
The Breakout Board contains a prototype rework area for making custom circuits for rapid
development. The area consists of plated-through holes, 20 columns wide by 27 rows
long. The top row of holes is connected to GND and the bottom row is connected to +5V.
The remaining holes are not connected. Use the rework area to insert custom
components and wire-wrap their respective signal, power, and ground pins.
Pin Signal Name Signal Description
1RSV Reserved
2 GND Ground
3 GP OUT General Purpose Output
4 TRG IN 1 Trigger In 1
5 GND Ground
6 DATA 6 Data 6
7 DATA 4 Data 4
8 DATA 3 Data 3
9 DATA 1 Data 1
10 GND Ground
11 RSV Reserved
12 RSV Reserved
13 +5V +5 Volts, 250 mA DC Source
14 RSV Reserved
15 GND Ground
16 TRG OUT Trigger Out
17 TRG IN 0 Trigger In 0
18 DATA 7 Data 7
19 DATA 5 Data 5
20 GND Ground
21 DATA 2 Data 2
22 DATA 0 Data 0
23 GND Ground
24 RSV Reserved
25 RSV Reserved
- PETracer ML 1
- PETrainer ML 1
- Document Disclaimer 2
- Trademarks and Servicemarks 2
- Copyright 2
- WEEE Program 2
- TABLE OF CONTENTS 3
- PETracer ML User Manual 4
- Teledyne LeCroy 4
- PETracer ML User Manual 5
- Teledyne LeCroy v 5
- Teledyne LeCroy vii 7
- Section 1. General 9
- 2 Teledyne LeCroy 10
- Chapter 1: Overview 11
- 4 Teledyne LeCroy 12
- Features and Benefits 13
- 1.3 CATC Trace Software 14
- 1.4 PETracer ML Analyzer 15
- 8 Teledyne LeCroy 16
- 1.5 PETrainer ML Exerciser 17
- 1.6 Other Documents 18
- 2.1 System Components 19
- 2.2 Host Machine Requirements 19
- 2.4 Protocol Analyzer Modules 20
- 2.5 PETrainer Exerciser 21
- 14 Teledyne LeCroy 22
- Teledyne LeCroy 15 23
- 2.8 Rear Panel Description 24
- Teledyne LeCroy 17 25
- 18 Teledyne LeCroy 26
- Package 26
- Power Requirements 26
- Environmental Conditions 26
- Switches 26
- 20 Teledyne LeCroy 28
- PETrainer Script Memory Size 28
- PETrainer Wait Conditions 28
- Teledyne LeCroy 21 29
- Prototype Rework Area 30
- Teledyne LeCroy 23 31
- 24 Teledyne LeCroy 32
- Chapter 3: Installation 33
- 26 Teledyne LeCroy 34
- Teledyne LeCroy 27 35
- 28 Teledyne LeCroy 36
- 3.5 Networking an Analyzer 37
- 30 Teledyne LeCroy 38
- Device Under Test 39
- 32 Teledyne LeCroy 40
- Teledyne LeCroy 33 41
- 34 Teledyne LeCroy 42
- Teledyne LeCroy 35 43
- 36 Teledyne LeCroy 44
- Probe Data Cable 45
- 38 Teledyne LeCroy 46
- ML Analyzer 47
- 40 Teledyne LeCroy 48
- Teledyne LeCroy 41 49
- 42 Teledyne LeCroy 50
- Chapter 4: Software Overview 51
- 4.2 Application Layout 52
- 4.3 Using the Toolbar 53
- 46 Teledyne LeCroy 54
- Multi-Segment Toolbar 55
- Traffic Generation Toolbar 56
- Toolbar Hide Buttons 57
- 50 Teledyne LeCroy 58
- 4.4 Using the Menus 59
- 52 Teledyne LeCroy 60
- Setup Menu 60
- Record Menu 60
- Generate Menu 61
- Report Menu 61
- 54 Teledyne LeCroy 62
- Search Menu 62
- View Menu 63
- 56 Teledyne LeCroy 64
- Tools Menu 64
- Window Menu 64
- Help Menu 64
- 4.5 Tool Tips 65
- 4.6 Keyboard Shortcuts 65
- 4.7 Status Bar 66
- Teledyne LeCroy 59 67
- 60 Teledyne LeCroy 68
- Recording Progress Bar 68
- Recording Status 68
- Recording Activity 68
- Search Direction Indicator 68
- Teledyne LeCroy 61 69
- 62 Teledyne LeCroy 70
- Stopping a Recording 70
- Saving a Recording 70
- What Gets Created 71
- 64 Teledyne LeCroy 72
- 4.10 PETracer Files 73
- 4.11 Opening CATC Trace Files 74
- 4.12 Saving CATC Trace Files 75
- 68 Teledyne LeCroy 76
- 4.14 Printing Data Files 77
- 4.15 Analyzer Chat Window 78
- 5.3 Resizing Cells 79
- 5.4 Pop-up Menus 80
- 5.5 View Data Block 80
- 5.6 Show Raw 10b Codes 81
- 5.7 Show Header Fields 82
- 5.8 Packet Cell Popup Menus 83
- 76 Teledyne LeCroy 84
- 5.9 Set Marker 85
- 5.10 Edit or Clear Marker 86
- 5.11 Decoding Traffic 87
- 80 Teledyne LeCroy 88
- 6.2 Go to Trigger 89
- 6.3 Go to Packet 89
- 6.4 Go to Time 90
- 6.5 Go to Marker 90
- Markers Overview 91
- Functionality of Markers 92
- Teledyne LeCroy 85 93
- Attaching Markers 94
- Adding an Attachment 94
- Video Files supported 95
- Teledyne LeCroy 89 97
- Text Attachment Pop-up Window 98
- No Attachments Pop-up Window 98
- Teledyne LeCroy 91 99
- File Attachment 100
- URL Link 100
- YouTube Video 101
- Edit Marker 102
- All Markers Window 103
- 96 Teledyne LeCroy 104
- 6.6 CATC Walk Playlist 105
- Playlist Functionality 106
- Teledyne LeCroy 99 107
- Playback Window 108
- Playlist Playback Controls 109
- 6.7 Go To Menu 110
- 6.8 Search Direction 111
- 6.9 Find 112
- Teledyne LeCroy 105 113
- Event Groups 114
- Chapter 7: Display Options 115
- Analysis Tools Checkboxes 116
- Configuration Name 117
- Setting Field Colors 118
- Teledyne LeCroy 111 119
- Changing Field Formats 120
- Hiding Fields 121
- 114 Teledyne LeCroy 122
- Hiding Levels 122
- Teledyne LeCroy 115 123
- 7.5 Saving Display Options 124
- Chapter 8: Recording Options 125
- 8.2 General Tab 126
- Recording Type 127
- Buffer Size 127
- Target Analyzer 128
- Trigger Position 128
- Trigger On 128
- Trace Filename and Path 128
- Options Name 129
- Save As MultiSegment Trace 130
- Viewing Multisegmented Files 130
- Teledyne LeCroy 123 131
- Link for PETrainer ML 132
- Teledyne LeCroy 125 133
- 126 Teledyne LeCroy 134
- Loading Recording Options 134
- Saving Recording Options 134
- 8.3 Recording Rules Overview 135
- Global State vs. Sequences 136
- 8.4 Recording Rules Buttons 137
- 8.5 Creating Recording Rules 137
- 130 Teledyne LeCroy 138
- Teledyne LeCroy 131 139
- 8.6 Recording Rule Limits 140
- Teledyne LeCroy 133 141
- Recording Rules Examples 142
- Teledyne LeCroy 135 143
- 136 Teledyne LeCroy 144
- Teledyne LeCroy 137 145
- 138 Teledyne LeCroy 146
- Teledyne LeCroy 139 147
- 140 Teledyne LeCroy 148
- 8.8 Properties Dialog Boxes 149
- 8.9 Event Properties Dialog 150
- Error Properties Dialog 151
- Actions Properties Dialog 151
- TLP Header Properties Dialog 152
- TLP Prefix Properties Dialog 152
- Payload Properties Dialog 153
- DLLP Packet Properties Dialog 153
- 8.10 Counting Events 154
- How to Set a Counter 155
- 8.11 Creating a Payload Match 156
- Example 1 157
- 8.12 Trigger 158
- 8.13 Filter In and Filter Out 159
- 152 Teledyne LeCroy 160
- Chapter 9: Reports and Tools 161
- 9.1 File Information 162
- 9.2 Error Summary 163
- 9.3 Traffic Summary 164
- Traffic Summary Buttons 165
- 9.4 Bus Utilization 166
- Bus Utilization Pop-up Menu 167
- 160 Teledyne LeCroy 168
- Bus Utilization Buttons 169
- 162 Teledyne LeCroy 170
- 9.5 Link Tracker 171
- Using the Link Tracker Window 172
- Teledyne LeCroy 165 173
- Hiding Traffic 174
- 166 Teledyne LeCroy 174
- Setting Markers 174
- Link Tracker Buttons 175
- 168 Teledyne LeCroy 176
- 9.6 Data Flow Window 177
- 9.7 Using the Trace Navigator 178
- Navigator Toolbar 179
- Navigator Ranges 179
- 172 Teledyne LeCroy 180
- To Reset Navigator Range 180
- Navigator Panes 181
- 174 Teledyne LeCroy 182
- Navigator Slider 182
- Trace Navigator Legend 182
- Teledyne LeCroy 175 183
- 9.8 LTSSM Flow Graph 184
- 9.9 Packet Header Bar 185
- 9.10 Packet Data Window 186
- 9.11 Configuration Space View 187
- 180 Teledyne LeCroy 188
- 9.12 Using Unit Metrics 189
- 182 Teledyne LeCroy 190
- Metrics Tool Tip Display 190
- Teledyne LeCroy 183 191
- 184 Teledyne LeCroy 192
- Teledyne LeCroy 185 193
- 186 Teledyne LeCroy 194
- Unit-Based Averaging 195
- 188 Teledyne LeCroy 196
- Link Transaction Level Graphs 196
- Teledyne LeCroy 189 197
- Real-Time Statistics Buttons 198
- 192 Teledyne LeCroy 200
- Teledyne LeCroy 193 201
- 194 Teledyne LeCroy 202
- 9.14 TC to VC Mapping 203
- 196 Teledyne LeCroy 204
- Bus Utilization 205
- Split Transaction Performance 205
- Memory Writes Performance 205
- 198 Teledyne LeCroy 206
- Teledyne LeCroy 199 207
- 200 Teledyne LeCroy 208
- Generation 209
- 202 Teledyne LeCroy 210
- 10.1 Theory of Operation 211
- 204 Teledyne LeCroy 212
- Script Execution 212
- 10.1 Traffic Generation Files 213
- 206 Teledyne LeCroy 214
- Teledyne LeCroy 207 215
- 208 Teledyne LeCroy 216
- Teledyne LeCroy 209 217
- 210 Teledyne LeCroy 218
- Script Editor Toolbar 219
- Script Edit Window 220
- Teledyne LeCroy 213 221
- Command Properties Window 222
- Script Editor File Tabs 223
- Script Editor Error Log 223
- View Options Menu 224
- Opening the Dialog 225
- 218 Teledyne LeCroy 226
- 220 Teledyne LeCroy 228
- Integrity 229
- 222 Teledyne LeCroy 230
- Flow Control 231
- 224 Teledyne LeCroy 232
- Transactions 233
- 226 Teledyne LeCroy 234
- Teledyne LeCroy 227 235
- 228 Teledyne LeCroy 236
- Teledyne LeCroy 229 237
- 230 Teledyne LeCroy 238
- Chapter 11: Macros 239
- 11.2 Adding New Script Macros 240
- Teledyne LeCroy 233 241
- 11.3 Modifying Script Macros 242
- Teledyne LeCroy 235 243
- 236 Teledyne LeCroy 244
- Chapter 12: Address Space 245
- Write Address Space Button 246
- Read Address Space Button 246
- 12.2 Memory/IO Space Editor 247
- 240 Teledyne LeCroy 248
- Configuration Space Files 249
- 242 Teledyne LeCroy 250
- Teledyne LeCroy 243 251
- 244 Teledyne LeCroy 252
- 13.3 BARs Setup 253
- 246 Teledyne LeCroy 254
- 14.1 Updating the Analyzer 255
- 14.2 License Keys 256
- 14.3 License Information 256
- Decoding 257
- , bit_offset, field_length ) 258
- in DWORD dword_offset 258
- A.5 Helper File 259
- Hazardous Substances Table 260
- Type of Service 261
- 254 Teledyne LeCroy 262
- Teledyne LeCroy 255 263
- Teledyne LeCroy Corporation 264
- Teledyne LeCroy 257 265
- Teledyne LeCroy 259 267
- Teledyne LeCroy 261 269
- Teledyne LeCroy 263 271
- Teledyne LeCroy 265 273
Relacionado con productos y manuales para Equipo Teledyne-lecroy PETracer ML Analyzer and Exerciser User Manual
Equipo Teledyne-lecroy SFF-8639 to PCI Express 3.0 Adapter Quick Start Manual de usuario
(4 paginas)
(4 paginas)
Equipo Teledyne-lecroy Protocol Analyzers File-Based Decoding User Manual Manual de usuario
(82 paginas)
(82 paginas)
Equipo Teledyne-lecroy Summit T28 PCIe Multi-lane Protocol Analyzer QSG Manual de usuario
(4 paginas)
(4 paginas)
Equipo Teledyne-lecroy PETracer Summit and Summit T2-16 PCIe User Manual Manual de usuario
(244 paginas)
(244 paginas)
Equipo Teledyne-lecroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual de usuario
(244 paginas)
(244 paginas)
Equipo Teledyne-lecroy Summit T28 PCIe Multi-lane Protocol Analyzer User Manual de usuario
(256 paginas)
(256 paginas)
Equipo Teledyne-lecroy Summit Z2-16 PCI Express Multi-lane Exerciser User Manual de usuario
(84 paginas)
(84 paginas)
Equipo Teledyne-lecroy Summit Z3-16 PCI Express Protocol Exerciser QSG Manual de usuario
(4 paginas)
(4 paginas)
Equipo Teledyne-lecroy Protocol PCI Express Script Automation Test Tool Manual de usuario
(55 paginas)
(55 paginas)
Equipo Teledyne-lecroy Summit T3-16 PCIe Multi-lane Protocol Analyzer Use Manual de usuario
(266 paginas)
(266 paginas)
Equipo Teledyne-lecroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual de usuario
(266 paginas)
(266 paginas)
Equipo Teledyne-lecroy PCIUD Manual de usuario
(1 paginas)
(1 paginas)
Equipo Teledyne-lecroy PCIUW Manual de usuario
(1 paginas)
(1 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales