
Teledyne LeCroy Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
149
replaced by specified symbol (K and 8b fields). All the other details are just similar to Error! Reference
ource not found..
EN
0: Disable (stop error injection), 1: Enable (run error
injection)
This bit will be cleared automatically when the INF bit is not
set and the Count value is reached down to zero.
INF
0: Run the command for the number of times specified in the
Count field, 1: Run the command for infinite times until the
EN bit is set.
ONCE
This bit shows that the error has been injected at least once
from the last time EN has been set. It will be cleared
whenever a value 1 is written to EN.
Count
Number of times the error should be injected if the MODE is
1. When read, it shows number of times remained yet to
finish the requested count.
Bitmap
This field determines which symbols in the framing
sequence should be corrupted. Bit 16 corresponds to first
framing symbol in the sequence and bit 19 corresponds to
EPF. SW should always write a non-zero value into this
field, otherwise, it will not inject any error.
LC Type
This field determines which LC types should be affected by
this command.
0: All LCs
1: Just LCRD
Others: Reserved for future use.
USR
1: Use user-defined pattern
0: Use default pattern
8b
8-bit code of substituting pattern
Comentarios a estos manuales